© 1998 SGC Inc
22
1. any ‘CMD’ + ‘XXX’ combination
2. ‘SPEED’
3. ‘"PBT"’
4. ‘MEM’
5. ‘"BW"’
9.3
Tx OUTPUT POWER LEVEL ADJUST (CMD + NB)
When pressing CMD and NB simultaneously, but momentarily, Tx
output power level is adjustable by rotating the main tuning knob.
Adjustment levels are made in increments of approximately one
watt, from 0 to 20 watts. To return to the frequency display, press
MEM. To enter this setting in the last recalled memory, press
FAST + MEM. Accurate calibration is not supported.
9.4
MEMORY SCAN (CMD + MEM)
To initiate memory scan mode, press CMD and MEM simultane-
ously, but momentarily. The SG-2020 will begin scanning the 20
memories. To stop memory scan, press any button or transmit.
9.5
FREQUENCY SCAN (CMD + "PBT")
To initiate frequency scan mode, first tune to the desired starting
frequency using the main tuning control. Pressing CMD and
"PBT" simultaneously begins the frequency scan. Blinking LED’s
will indicate the direction of the scan. To reverse the scan direc-
tion, press REV momentarily. To stop frequency scan, rock the
tuning knob back and forth.
9.6
ADJUST FREQUENCY SCAN VARIABLES (CMD + REV)
The following scan variables may be adjusted by the user by
pressing CMD and REV simultaneously but momentarily:
DWELL TIME: 0.1 thru 10 seconds, 0.1 second increments
Dwell: ‘d’ is displayed (Press MEM to enter).
PAUSE on DETECTION: 1 thru 120 seconds,1 second increment.
Pause: ‘P’ is displayed (Press MEM to enter).
DETECTION THRESHOLD: S1 thru S9, 1 'S' unit increment .
Threshold: ‘S’ is displayed (Press MEM to enter).
AUDIO BLANKING TIME: 0 - 1.28 seconds in 10 ms intervals
SGC Inc. SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA
P.O.Box 3526, 98009 Fax: 425-746-6384 or 746-7173 Tel: 425- 746-6310 or 1-800-259 7331
E-mail: [email protected] Web site: http://www.sgcworld.com
Summary of Contents for SG-2020 TEST DOCUMENT
