IC706 Transceiver
Low Power ADSP
2
Installation
Catalog Number 70-11
SGC Inc. SGC Building, 13737 SE 26th St. Box 3526 Bellevue, WA. 98009 USA
Fax: 425-746-6384, Tel: 425-746-6310 or 1-800-259-7331
E-mail: [email protected] • World Wide Web:
www.sgcworld.com
©
April 2003, SGC Inc.
5. Installing the Switches
The switches may be installed in any convenient location. The specific choice of switches
was made to make it easy to mount on nearly any transceiver. Some people have chosen
to install their switches on the side of the unit, others have preferred the top, and some on
the front. Your specific installation will determine what the best location is. We brought
the switch out through the Compression Gain control on the right side when looking at
the front.
SGC welcomes any suggestions regarding these switches to improve installation and
operation.
CAUTION
: Overdriving the ADSP2 module may cause distortion. Backing off the level
of the input signal will avoid it.