SG Security Communications MLR2-DG, Installation Manual

Page: 31 / 60

27
FBI Super Fast Format
This DTMF format consists of 4-digit Account Codes, 2-
digit zone codes, 1-digit zone type codes, and 1-digit event
codes. The zone codes will be converted into 3-digit decimal
codes by the DRL2A.
The following are the zone type codes used by this format:
FBI Code Converted Event
Event Code
Fire 1 A
Panic 2 A
Burglary 3 A
Medical 4 A
Auxiliary 5 A
Bypass 6 B
Inactive 7 A
Eight 8 A
Nine 9 A
Zero 0 A
Opening B O
Closing C C
Abort D T
Restore E R
Trouble F T
Note that option [3B] can give a unique FBI RS232 output
when enable.
ITI Format
The ITI format covers ITI panels model: RF Commander, Caretaker Plus, SX-1VB, SX-V, Commander III, Commander 2000,
Security Pro 5000 and UltraGard 5000. In order to receive the ITI format, handshake #10 must be programmed. After a
coldboot, the fifth handshake (option [45]) is programmed as 10.
ITI LIBRARY ITI LIBRARY ITI LIBRARY ITI LIBRARY ITI LIBRARY
SENSOR No.
SENSOR No. SENSOR No. SENSOR No. SENSOR No. PRINTED OUT AS PRINTED OUT AS PRINTED OUT AS PRINTED OUT AS PRINTED OUT AS SPECIFICS SPECIFICS SPECIFICS SPECIFICS SPECIFICS
00 00 Buddy Alarm xx SX-V only
01-32 XX ALM Caretaker plus
00-16 XX ALM RF Commander / Commander III
02-07 XX ALM SX-IVB
01 BAD SENSOR # SX-V only
02-76 XX ALM SX-V
10-18 XX ALM Commander 2000
01-76 XX ALM UltraGard 5000
77 77 Alram Tmpr / Supervisory / CANC Caretaker plus, SX-IVB, SX-V UltraGard 5000 only
78 78 TRB Caretaker plus, UltraGard 5000 only
79 79 No activ alm / CANC Caretaker plus, UltraGard 5000 only
80 80 Alarm All supported ITI panels
81 81 Alarm All supported ITI panels
82 82 Alarm All supported ITI panels
83 83 Phone Tst All supported ITI panels
84 84 OpenUsr xx All supported ITI panels
85 85 CloseUsr xx All supported ITI panels
86 86 SilentDuress All supported ITI panels
87 87 ForceArmed / AutoForceArm All supported ITI panels
88 88 TRB Caretaker plus, UltraGard 5000 only
89 89 TRB Caretaker plus, UltraGard 5000 only
90 90 AC Fail / RESTR All supported ITI panels
91 91 Low CPU Bat / RESTR All supported ITI panels
92 92 AlmTamprLoop / RESTR All supported ITI panels
93 93 AutoPhoneTst All supported ITI panels
94 94 TRB All supported ITI panels
95 95 CPU Back In / 95 RESET All supported ITI panels
96 Failure to communicate Local alarm only
97 No phone line Local alarm only
98 98 Event Dump Report Commander 2000
Modem II, Modem IIE,Modem IIIa 2 and BFSK Formats
The alarm signals sent by the D2112, D4112, D6112, D7112,
D7212, D8112, D9112, Discovery 1000, NAPCO 3000 and
Honeywell D5700 using Modem II or Modem IIE formats
can be decoded by the DRL2A.
The printer messages will be similar to the following:
Modem II Single Line Example:
L01-1234-CLOSING
ID 801 14:04:20-09/13
BFSK Example:
L01-123-CLOSING
ID1 15:19:23-10/06
Modem II Double Line Example:
L01-1234-ALARM REPORT
14:05:20-09/13
AREA=1 POINT=008 14:05:21-09/13
• L01 represents Line 01
• 1234 represents the account codes.
The Signals will be sent to the computer according to Option
[59]:
If Option [59] = 00:
1011ssssssAAAAXXYYYY[DC4]
If Option [59] = 01: 6011ssssssAAAAXXYYYY[DC4]
Following the example described above, the signal will be
sent to the computer as:
1011ssssss1234sAs300[DC4]
or
6011ssssss1234sAs300[DC4]
NOTE: The DRL2A will not follow the listen-in time sent by
any transmitter even though the time is printed. The DRL2A
will follow its own audio duration programmed at location
[49].