SG Models Master P-47D Thunderbolt, Assembly Manual

Page: 34 / 87

P -47D hunderbolt 60 Kit
34
Instruction Manual.
- Slide the fuel tank into the fuselage. Guide the
lines from the tank through the hole in the iewall.
- Use plywood template to hold in place the fuel
tank with C/A glue to secure the fuel tank inside
the fuselage.
Epoxy
Balsa wood
3 .
2 .
Fuel pick up tube
Fuel ill tube
Vent tube
- Connect the lines from the tank to the engine and
muler. he vent line will connect to the muler
and the line from the clunk tothe carburetor.
MOUNTING THE ENGINE - 2 stroke
- Position the engine with the drive washer
(145mm) forward of the iewall as shown.
1 .
145mm
- Use a pin drill and 4mm drill bit to drill a small
indentation in the mount for the engine mounting
screw.
3 .
- Use a drill to drill the four holes in the engine
mount rails.
2
.
Blow through one of the lines to ensure the fuel
lines have not become kinked inside the fuel tank
compartment. Air should low through easily.
4mm