Preparation for installation
3
Preparation for installation
If the EFOY fuel cell has been in storage for more than 6 months, test its
functionality prior to installation.
Connect the EFOY fuel cell to a battery and allow it to complete a loading cycle. A
loading cycle can take several hours.
For information on how to connect the EFOY fuel cell to a battery, see
SECTION
Prepare tools
•
Electric drill
•
Jig saw
•
Screwdriver
•
Allen wrench 3 mm
•
Crimping tool (0.75 mm² and 4 mm² cable diameter)
•
Battery terminals to connect to your battery
•
Sealant
•
Scissors or cutter
The following screws should be used, depending on the substrate (screws are not
included in the product contents):
•
Attaching the belt brackets: 4 screws (countersunk screws, hole diameter
Ø
5.2 mm)
•
Attaching the mounting plate: 6 screws (countersunk screws/
Ø
5 mm)
The shaft and thread type depend on the material to which the mounting plate will
be attached.
•
Attaching the fuel cartridge holder: 4 screws (e.g. pan head screws
Ø
5.5 mm).
•
Attaching the operating panel: 4 screws (e.g. pan head screws
Ø
3.5 mm).
Optional:
•
Plugs if needed
•
Cable clips if needed
Summary of Contents for EFOY Pro
Page 1: ...Safety instructions...