8
9
EN-US
1. SAFETY
Read the user manual carefully before using your appliance
for the first time.
1.1 IDENTIFICATION OF THE WARNINGS
Meaning
DANGER
This term defines a high risk of dan-
ger, which can lead to death or se-
rious injury, if not avoided.
WARNING
This term defines a medium risk of
danger that can lead to minor to se-
rious injury, if not avoided.
NOTICE
This term defines dangers to the ma-
chine and its proper operation.
Warning of a general danger.
The danger is specified by indications
given in the table.
Warning about the dangers associa-
ted with the electrical voltage and
provides information about protec-
tion against electrical voltage.
1.2 GENERAL
DANGER
Electrical hazards and risks of cuts.
Never dismantle the appliance.
Don’t use your appliance if a cable or
connection plug is damaged.
To avoid danger, have repairs done by
authorized personnel.
Connection errors (observe the polarity) or incorrect connec-
tion invalidate the warranty.
WARNING
Risk of cutting.
Never touch moving parts.
Incorrect use or installation releases SFA-Saniflo from any lia-
bility. For further information, don’t hesitate to contact our
customer service.
DISCONNECT THE ELECTRICAL POWER SUP-
PLY, BEFORE ATTEMPTING ANY WORK ON THE
UNIT.
3. DESCRIPTION
3.1 OPERATING PRINCIPLE
SN4 071
combines :
- a macerator pump that grinds and drains the wastewater
into the black water tank
- and a solenoid valve that fills the bowl with clean water.
3.2 TECHNICAL DATA
Maximum vertical pumping
height
10 ft (3 m)
Maximum horizontal pumping
height
100 ft (30 m)
Current consumption
12 V or 24 V
Nominal power
300 W in 12 V (25 A)
360 W in 24 V (15 A)
Net weight
62 Lbs (29 kg)
Electricity consumption per automatic cycle
Normal (15 s)
12 V : 0.105 Ah
24 V : 0.060 Ah
Eco (13 s)
12 V : 0.091 Ah
24 V : 0.052 Ah
Water consumption per cycle
(depending on incoming water pressure)
Normal
0.79 gal. (3 L)
Eco
0.63 gal. (2.4 L)
3.3 PERFORMANCE CURVE
0
10
20
30
40
50
60
70
80
90 100 L/min
m
Ft
3
2
1
0
9.8
6.5
3.28
0
0
Gal/min
2.6
5.3
7.9 10.5 13.2 15.8 18.5 21 23.7 26
12 V
24 V
Vertical height
Flow rate
3.4 DIMENSIONS
14-1/2" / 371.5mm
11-1/2" / 290mm
16
" /
410mm
21-1/2" / 548mm
16-3/4" / 425mm
18
-1/2" /
470mm
2. APPLICATION
SN4 071
is a bowl fitted with a pump/macerator to remove
the sanitary effluent.
SN4 071
is for mobile unit use. The unit has a high perfor-
mance level, and is safe and reliable, provided all the rules
for installation and maintenance in this notice are strictly fol-
lowed.
All applications other than those described in this
manual are prohibited unless approved by a
manufacturer’s representative.
4. INSTALLATION
See pg.
3
to
7
The
SN4 071
installation must comply with local plumbing
codes. All work to install the equipment, put it into service
and carry out maintenance must be done by a qualified pro-
fessional specialist.
4.1 FIXING BOWL TO THE FLOOR
• Draw the outline of the base on the floor, in the area around
the fixing holes in the ceramic bowl.
• Measure 1/2’’ from the outline drawn, position the brackets
and drill through the middle of the holes.
• Screw the brackets in place, leaving them loose, they will be
tightened once the bowl has been fitted.
Fit the bowl
Note: wait until all the connections have been made before
fixing the bowl definitively in place.
• Fix
SN4 071
securely using the screws provided.
• Your mountings must be appropriate for the base on which
the device is to be installed.
4.2 EVACUATION
The discharge outlet has a non-return valve.
The discharge diameter is 38 mm.
4.3 FITTING THE CONTROL PANEL
• Select control panel location convenient to toilet.
• The keyboard must be fitted in a position where it does not
interfere with use of the seat and cover, and it must not be
placed more than 4 ft from the control box.
• Cut out a rectangle measuring 3’’x 2’’ from the bulkhead.
• Fix the panel in a horizontal position and clip the frame
into place.
4.4 ELECTRICAL CONNECTIONS
The electricity supply to the
SN4 071
must be connected
directly to the electrical switchboard, and it must be
US-EN
