SF SF-52P, Operation Manual

Page: 17 / 20

15
longer the pressing time.
2-2 Blade replacement( Be more careful to operate)
◆
Go to “System Setting” as follows, press “Cutter change”
◆
Press cut buttons, the blade comes down;
◆
Release t
wo open notched fasten screw(see 1) on the blade carrier;
◆
Take off the fasten screws, except No 2 screw;
◆
Press cut buttons, blade rises, revolve two screws clockwise,take off
other fasten screws including No 2;
◆
Revolve the two screw stems anticlockwise for half circle, then take out
the blade. Please wear gloves or use cotton cloth to wrap the blade to
avoid being hurt;
◆
Be careful when taking a new blade out. The blade cutter pointing must
not be to the body. When installing the blade, screw up the screw stems.
Set the blade on the blade carrier, use screw strip to fasten and fix up, then
adjust it according to cutting depth adjustment method.
◆
Do
blade sharpening in a professional factory.
Note
: Cutting thick paper or pasteboard frequently will make the blade dull.
Prepare one replacement on hand.
Be careful when change the blade.
2-3 Cutting stick adjustment
◆
One cutter stick can be used for 4 times;