11
4-2 Operation for the touch screen
4-2-1 Touch screen
1. Numerical mode
Enter the number you want, press “ENT”, the back gauge will go to the position you want
and machine gets to cut, for example, if you want to cut a length of 270.50, enter the number
270.5 in the touch screen and press “ENT” will make the back gauge go to this dimension
and ready for work.
2. Program mode:
100 programs , with 30 steps each. On touch screen, it is production number, production
model, number of segments. For A3 paper, you can set the first step to be 297, press
“ENTER” to confirm, then set the second step to be 422, press “ENT” to confirm, for the
third step to be 420, press “ENT” to confirm, select 3 in the numbers of segments. It means
this production you have 3 lengths can be set, then press “ENT” to get machine to cut. In
program mode, there is a PUSH key, when it is available, the machine will push the paper 15
cm forwards after each cut (for customers to take out the paper easily). To cancel the
function, press the PUSH key then it will be invalid.
Summary of Contents for SF-52P
Page 1: ...SF H67P H52P SF 67P 52P Operation Manual...
Page 2: ......
