13
Chapter III Basic operation and adjustment
1. Basic operation
1-1 Turn on the machine
◆
Make sure there is nothing else but the papers to be cut, clean the machine firstly;
◆
Plug the machine to socket for 380V/220V +/- 10%, 50Hz, 4Kw;
◆
Turn on the electric control, turn the main power to “ON” position, screen is on, light of
the machine is on, means it is ready for work.
1-2 Operation instruction
1) Electronic wheel use. Clockwise rotation makes the back gauge move forwards.
Anticlockwise rotation makes the back gauge move backwards. The accuracy can reach
0.1 mm.
2) When put the paper or books on the machine, make sure they are tidy and aligned against
the left side of the machine and scale.
3) After the cut size confirmed and paper put in the right position, downward the foot pedal,
clamp the papers, both two hands on the cut buttons to start cutting. Or you don’t have to
use the foot pedal, only to press the cut buttons with two hands to start the clamp and cut
automatically. If you find anything wrong, release the cut bottom to stop the clamp and
blade, press only clamp back switch to make the clamp up, make sure everything is right
then cut.
Summary of Contents for SF-52P
Page 1: ...SF H67P H52P SF 67P 52P Operation Manual...
Page 2: ......
