20
19
9-2. Auto Cutter Specifications
(1) Cutting Frequency
Max. 30 cuts per minute
(2) Thickness of paper
0.06 ~ 0.09 mm
(3) Cutter Life
1.5 million cuttings
(if the paper thickness is between 65 and100µm
9-3. Interface
RS232C Serial Interface, USB Interface
9-4. Electrical Characteristics
(1) Input Voltage
DC 24V ± 10%
(2) Current Consumption
Operating: Approx. 1.5 A (at ASC
∥
printing)
Peak : Approx. 10 A
(at print duty 100%, For 10 seconds or less)
Stand-by : Approx. 0.03 A(RMS)
(3) Power Connector
♣
Important!
When connecting or disconnecting the power supply from the printer, be sure to follow
instructions below.
Use a power supply (Limited Power Supply) of DC 24V±10% and more than 1.75A.
Be careful when installing the printer in an area where there is noise.
Take the appropriate measure to protect against electrostatic AC line noise, etc
9-5. Environmental Requirements
(1) Operating
Temperature
5°C to 40°C
Humidity
10% to 90% RH (without condensation)
(2) Transport/Storage (except paper)
Temperature
-20°C to 60°C
Humidity
10% to 90% RH (without condensation)
9-6. Reliability
(1) MCBF
60 million lines (based on an average printing rate of 12.5% with paper
thickness in the range of from 65µm - 75µm)
35 million lines (based on an average printing rate of 12.5% with paper
thickness in the range of from 76µm - 150µm)
(2) Head Life
160Km
(3) Cutter Life
1.5 million cuttings (if the paper thickness is between 65 and 90µm)
9-7. Certification
(1)FCC PART15 CLASS A
(2)CE EMCD/LVD
( CE-EMCD class B should use parallel shield cable complied with IEEE-1284 standards)
(3)UL/cUL
(4)KC
(5)ENERGY STAR
This equipment is indoor use and all the communication wiring are limited to inside
of the building”
Summary of Contents for SLK-TL100
Page 2: ...2...
