12
13
8. Setting up the sensors
1 2
3
Notch Sensor
Black Mark Sensor
Set Black Mark Sensor right to the size of roll paper
Locate notch sensor on the same number point- as the
black mark sensor is indicating on.
Black Mark Sensor and Notch sensor must always
point to the same number
If the thickness of paper with black mark
is less than 0.1mm, it is recommended
setting the black mark sensor and gap
sensor to different location (number)
each other.
**8 is the initialization number for sensor of the product.**
1 2
3
9. Self Test
Turn off the printer
Press and hold the feed button while turning on
the printer with power switch
The printer prints information on the printer
configuration and quality of the printing
Note
Power switch sig
1 2
3
