Se i
M
i e Presser F
Se User Guide
. hread the elastic through the hole on the braiding
foot from the top and under the back of the foot. ove
the guide by loosening the screw and snugging it up to
the elastic but allowing the elastic to slide through
freely.
. Select the overcast stitch ad usting the width to cover
the elastic.
. egin sewing letting the elastic slide through the foot
as you sew.
. Pull the elastic up to the degree of gathers as desired.
the elastic should slide easily in the thread casing.
.
ark the placement of the elastic.
. eed the elastic through the hole on the front of
the foot and under the back. Slide the metal guide
around the elastic and tighten the screw. he elastic
should be able to slide easily through the hole.
. Select the appropriate tape attaching stitch on
your machine. ower the needle and take a few
stitches to hold the elastic in place.
. As you start sewing stretch the elastic in front of
the foot. he fabric will begin to gather behind.
. Position the ribbon or trim in the spot desired. Select
the twin needle width desired.
. hread the ribbon or trim through the braiding foot
and tighten the screw.
