Se i
M
i e Presser F
Se User Guide
vercast oot
The overcast foot is a presser foot designed for finishing raw edges or for
sewing stretchy seams. The overcast foot produces stitches that wrap over
the edge of the fabric with an effect similar to a serged edge. A seam
guide sticks out along the right toe of this presser foot, with a small metal
tongue that extends across the center of the needle opening. Unlike the
seam guides of many presser feet, this guide is located on the left side of
the right toe and is designed to keep the fabric edge to the left of the
furthest reach of the needle. As a result, stitches made with this foot wrap
around the outer edge of the fabric, rather than piercing it. In addition, the
center tongue holds the thread off the fabric. This effect keeps the stitches
from being pulled too tightly and prevents the edge of the fabric from
rolling up.
I EO EMO
ow o se an vercast oot
Satin Stitch oot
The satin stitch foot is a presser foot designed for creating satin stitches to
decorate finished products. This foot’s guide notch is designed to keep the
satin stitch right on the edge of an applique or pattern marking, making it
ideal for satin stitching. The satin stitch foot is similar to the open toe/
embroidery feet, but the satin stitch foot maintains a bridge between the
toes. The bridge of the stain stitch foot includes a guide notch that help
keep stitching lined up precisely. This foot’s needle hole is wide to
accommodate wide, zigzag decorative stitches or true satin stitch settings.
This foot also has a groove on the bottom to accommodate the height
and bulk of closely spaced stitches.
ow to sew using a Satin Stitch oot
