2
2 Use
2
Use
2.1
First use
CAUTION!
Before placing
SeCorr 08
and
RT 06
for the first
time into service, make sure that all used batteries
are completely charged. If the batteries are only
partially charged, the capacity of the batteries may
be reduced thus leading to shorter operation.
2.2
Switching ON/OFF
Position both piezo micro-
z
phones at accessible fitting
parts. If the circular magnet
is screwed on the piezo mi-
crophone, it may be required
to remove the circular, firmly
adhering protective disk from
the magnet.
Plug both microphone con-
z
nectors into the sockets of the
radio transmitter RT 06. If you
want to use only one RT 06, it
is required to connect a micro-
phone directly to input 2 of the
SeCorr 08.
On the
RT 06, LED 1 must
be lit.
Connect the headphones to
z
socket 3 of the SeCorr 08.
Switch on the SeCorr 08 by
z
pressing the ON/OFF key for
a couple of seconds.
2
1
