17
3 Operation
3.2.7
Device inspection
The
device inspection
can be used to check the general status
and the indication accuracies.
Device inspection
only appears
in the menu when the integrated device inspection is switched on.
Note:
The integrated device inspection is switched off in the factory
settings. More detailed information about the device inspection
can be found in Section 5.1 on page 31.
If the integrated device inspection is switched on, the device will
remind you to perform a device inspection.
The
Device inspection
symbol will appear when the
inspection is due. It is visible in the display until the
complete integrated device inspection has been carried
out successfully.
3.2.8
Gas type CxHy
You can temporarily change the gas type under
Gas type CxHy
in the menu, provided the device is designed for additional gas
types. Gas types available for selection:
●
Methane CH
4
●
Propane C
3
H
8
●
Butane C
4
H
10
●
Nonane C
9
H
20
The temporary gas type change is not saved. If you need to set
a different default gas type, you can do this in the
Settings
menu
under
System
.
