10
│ 3 Energizing a pipeline
3. Deactivate or activate the desired frequencies.
a) Press the arrow keys to select a frequency.
b) Press the pulse key to deactivate or activate the selected
frequency.
x
Frequency activated
o
Frequency deactivated
c)
Press the On/Off key to apply the setting.
4. Press the Down key repeatedly until the main view appears
again.
3.2.3
Adding a frequency
For direct energizing, up to 5 additional frequencies can be add
-
ed to the factory-set frequencies. If individual frequencies have
already been created, these can also be overwritten.
Frequency list 3
o 135 Hz < Edit
9
o 200 Hz
o 200 Hz
o 200 Hz
o 200 Hz
Fig. 8:
Frequency list
3 view - Individual frequencies (
here:
top place-
holder occupied by individual frequency 1359 Hz)
The generator is switched off.
1. Open the
PIN-Code
view (fig. 6).
● Simultaneously press both frequency keys and the On/Off
key until the
PIN-Code
view appears.
2. Enter the PIN code
0001
.
●
Press the arrow keys to move the cursor right or left.
●
Press the frequency keys to increase or decrease the digits.
● Press the On/Off key to complete the PIN code entry.
●
The
Frequency list 1
view (fig. 5, left image) appears.
