4
Multi-point synchronization
Startup
Product Manual – MOVITRANS
®
TES31A Decentralized Supply Unit Synchronization
23
Starting up a slave
INFORMATION
After the configuration as "MP slave", the fault message "68.11 synchronization lost,
sync signal invalid" may occur in other synchronization stations. Reset this fault with
a manual reset in the "Setup" window or with the process data control word.
Proceed as follows if you would like to put the slave into operation:
1. Select the "Synchronization" node in the parameter tree.
2. Set the "Interface function" setting to "Sync".
3. Under "Sync mode", select the setting "MP slave".
31168322699
29190657/EN – 04/2020