10
Operating Instructions – 10 kW Supply Module with Integrated Braking Resistor
3
Important notes
Unit Design
3
Unit Design
3.1
Important notes
Protective measures
and
protective equipment
have to meet the respective national
regulations in effect
.
3.2
Nameplates, unit designations
Nameplate of a 10 kW supply module with integrated braking resistor
NOTE
Follow the specific operating instructions during installation and startup of the motor
and the brake!
WARNING!
The following "Unit design" illustrations show the units without the provided protection
cover (touch guard). The protection cover protects the area of the mains and braking
resistor connections.
Uncovered power connections.
Severe or fatal injuries from electric shock.
• Install the touch guard according to the regulations.
• Never start the unit if the touch guard is not installed.
63363axx
Figure 1: Example nameplate of a 10 kW supply module with integrated braking resistor
1 5
1 0
2 0
1 8
4 5
P = 2 2 0 W
R i
1
10
1
10