Manual – MOVITRAC® B Communication Interface FSE24B EtherCAT®
31
7
First steps
Operating MOVITOOLS
®
MotionStudio via EtherCAT
®
7.2
First steps
7.2.1
Starting the software and creating a project
Proceed as follows to start MOVITOOLS
®
MotionStudio and create a project:
1. Start the MOVITOOLS
®
MotionStudio from the Windows start menu via:
[Start] / [Programs] / [SEW] / [MOVITOOLS MotionStudio] / [MOVITOOLS Motion-
Studio]
2. Create a project with a name and directory.
7.2.2
Establishing communication and scanning the network
Proceed as follows to establish a communication with MOVITOOLS
®
MotionStudio and
scan your network:
1. Set up a communication channel to communicate with your units.
For detailed information on how to configure a communication channel, refer to the
section "Communication via ...".
2. Scan your network (unit scan). Press the [Start network scan] button [1] in the tool-
bar.
9007200387461515
[1]
Summary of Contents for FSE24B EtherCAT
Page 2: ...SEW EURODRIVE Driving the world...
Page 51: ......
