Instruction Manual for Spirit & Spirit Tab-Tension Series In-Ceiling Electric
Installation Instructions
1. Slide four M5 screws (two along each track) onto the screen case (Fig. 1). Place the first
screen bracket on the screen case aligned with the four screws (Fig. 2). Slide the bracket so
that there is no gap between the bracket and the end of the screen case. Secure the
bracket with a nut on each screw (Fig. 3). Repeat this step for the second bracket on the
other end.
2. Slide the threaded installation rods through the holes in the each ceiling-mount bracket
and secure each rod on both sides with nuts until the ceiling-mount brackets are secure
(Fig. 4). Install the ceiling brackets (Fig. 5) at the previously marked locations (see Preparation
Instructions).
Note 2.1: The included threaded installation rods are M10 x 1.5mm pitch, 3.3 ft. (1.0 m) long.
The rods can be carefully cut to length if they are too long for the installation.
3
