9
142 x 208 mm
Multifunctional food processor
Dear Customer,
Before using the appliance, please read the following
instructions carefully and keep this manual for future
reference. The appliance must only be used by persons
familiar with these instructions.
Connection to the mains supply
Make sure that the supply voltage corresponds with the
voltage marked on the rating label of the appliance. This
product complies with all binding CE labelling directives.
Appliance Parts and Accessories
1. Grinding attachment container
2. Grinding attachment base
3. Mixing jug lid insert
(also for loosening blade unit)
4. Mixing jug lid
5. Mixing jug
6. Mixing jug blade unit
7. Nameplate (appliance underside)
8. Power cord with plug
9. Motor unit with rotary switch
10. Drive
11. Scraper
12. Working container
13. Drive shaft
14. Reversible working discs (P, F, R)
15. Emulsifying disc
16. Kneading tool
17. Chopping tool
18. Working container lid
19. Feed tube food pusher
Safety instructions
∙ In order to avoid hazards and to
comply with safety regulations, any
repairs to the appliance and the power
cord must only be carried out by our
customer service. Therefore, in the
event of a repair being needed, please
contact our customer service by phone
or email (see Annex).
∙ Disconnect the appliance from power,
-before any assembly or disassembly,
-before any opening of the lid,
-if supervision is not available,
-after every use,
-in the event of problems during
operation,
-before cleaning, every time.
∙ Do not take the power plug out of the
socket by pulling on the power cord,
but hold the power plug to take it out.
∙ Operating times and settings for the
individual accessories are provided
in the table at the beginning of the
manual.
∙ Warning! Using the appliance
incorrectly can lead to injuries.
∙ Warning! Only use the appliance
with the lid or protection in the correct
position for use, as described in the
manual. Because of the two safety
switches, the appliance can only be
switched on when the appropriate
accessories are attached and correctly
locked in place.
∙ The chopping tool blades and discs
are sharp! Risk of injury! Particular
care must be taken when emptying the
working container and during cleaning.
∙ For reasons of electrical safety, the
motor unit must never come into
contact with liquids or be immersed in
them.
∙ Immediately after use, clean the
removable parts with water and dry
them thoroughly.
∙ The removable accessories, but not
the blade unit of the blender container
and the scraper, can be cleaned in the
dishwasher.
∙ For more information on cleaning,
please refer to the Cleaning and Care
section.
GB
Summary of Contents for KM 3892
