background image

Important: 

Check 

www.v7world.com

 for the latest documentation and downloads

Safety Warnings 

•  Do not place heavy objects on top of the unit. 
•  Do not put the unit near appliances that generate magnetic fields 
•  Do not expose the unit to direct sunlight and other sources of heat
•  Do not place the unit on an unstable cart, stand, tripod, bracket, table,      
      or shelf
•  Do not put any liquid near or on the unit 
•  Do not spill any liquid inside the unit
•  Check and ensure AC source is grounded 
•  Only use the power cord that came with this product
•  Do not use extension cords
•  Unplug power during thunderstorm or lightning 
•  Make sure the unit’s operating voltage is compatible with the plug 
       you will use 
•  Unplug the power cable if the unit will be idle for a long period of 
       time
•  Unplug the power cable before cleaning
•  Clean the screen with a soft, dustless, dry cloth
•  Never use water or spray type detergent to clean
•  Never use any hard or sharp objects to replace the touch pen
•  To ensure long life and display performance, do not keep brightness 
      on high setting for long periods of time 
•  Do not place the unit near or over a radiator or a heater
•  If your unit is suddenly moved from a cold to a warm location, please 
       unplug the power cable and do not turn it on for at least 2 hours to 
       be sure the moisture inside the unit has been evaporated
•  Do not expose the unit to rain, or places of high humidity
•  Make sure environment is dry, cool and well ventilated
•  Check that you are following the environmental specifications for temperature
       and humidity
•  Do not turn off the unit after the unit enters standby mode
•  Make sure the remote control batteries are properly disposed or recycled after 
      changing 
•  This machine should only be maintained by certified engineer

Having trouble? 

contact our technical support team at www.v7world.com

2

Summary of Contents for 8UL180













Reviews: