Manufacturer:
Address:
Product name:
Motors that comply with Guidline 2009/125/EC and Regulation (EU) No. 4/2014 are given the identifier IEx-, before the
series designation where x = 1,2,3,4 (according to EN 60034-30-1:2014).
The subject matter of the declaration described above complies with the relevant EU harmonisation
legislation:
2014/35/EU
Directive of the European Parliament and of the Council of 26 February 2014 on the
harmonisation of the laws of the Member States relating to the making available on the
market of electrical equipment designed for use within certain voltage limits
Official Journal of the European Union L96, 29.03.2014, S. 357-374
2014/30/EU
Directive of the European Parliament and of the Council of 26 February 2014 on the
harmonisation of the laws of the Member States relating to electromagnetic compatibility
Official Journal of the European Union L96, 29.03.2014, S. 79-106
2009/125/EC
Directive of the European Parliament and of the Council of 21 October 2009 establishing a
framework for the setting of ecodesign requirements for energy-related products Official
Journal of the European Union L285, 31.10.2009, S. 10-35
The sole responsibility for issuing this Declaration of Conformity lies with the
manufacturers.
Compliance with the provisions of these Directives is demonstrated by compliance with the
following standards:
Reference number and issue date
EN 61000-6-2:2005+Cor.:2005, EN 61000-6-4:2007+A1:2011
EN 60038:2011, EN 60204-1:2018
EN 60034-1 :2010+Cor.:2010
and all other relevant parts and additions EN 60034- ...
The specified product is intended for incorporation into another machine. Commissioning is
prohibited until the conformity of the final product with Directive 2006/42/EC has been
established. The safety instructions in the supplied product documentation must be observed.
This certificate attests the conformity with the named directives; however, it is not a promise of properties in the meaning of
product liability. In case of electronic communication, the signature does not appear.
SEVA-tec GmbH
Lether Gewerbestrasse 10
26197 Ahlhorn
Low voltage asynchronous motors,
single phase motors, gear motors
EU Declaration of Conformity
Joachim
Schulz
Managing Director
GmbH - Lether Gerwerbestrasse 10 - 26197
20
