background image

17

be reasonably required by Séura to verify the Product’s warranty 

eligibility. Séura shall have no liability with respect to Products 

whose serial number has been removed, defaced, replaced, or 

otherwise  tampered  with  in  any  manner.  Séura  reserves  the 

right to examine all failed product components and determine, 

in its sole discretion, whether any product components are 

defective and covered under warranty.

LIMITATION OF LIABILITY. 

THE EXPRESS LIMITED WARRANTIES 

SET FORTH HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES, 

WRITTEN OR ORAL, EXPRESSED OR IMPLIED, INCLUDING, 

BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF 

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR 

USE. SÉURA WILL NOT BE LIABLE FOR ANY DAMAGE TO OTHER 

PROPERTY CAUSED BY ANY DEFECT IN THE PRODUCT, DAMAGES 

BASED ON INCONVENIENCE, LOSS OF BUSINESS OPPORTUNITY, 

LOSS OF GOODWILL, INTERFERENCE WITH BUSINESS 

RELATIONSHIPS, OR OTHER COMMERCIAL LOSS, EVEN IF 

THE CUSTOMER HAS BEEN ADVISED OF THE POSSIBILITY OF 

SUCH DAMAGES. SÉURA WILL NOT BE LIABLE FOR ANY LOSS, 

DAMAGE OR LIABILITY OR ANY DIRECT, INCIDENTAL, INDIRECT, 

PUNITIVE, SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING 

FROM THE USE OR MISUSE OF A PRODUCT, OR ARISING OUT 

OF ANY BREACH, BY THE PURCHASER OF A PRODUCT, OF 

THIS LIMITED WARRANTY. SÉURA SHALL NOT BE LIABLE FOR 

ANY CLAIM AGAINST THE CUSTOMER BY ANY OTHER PARTY. 

SÉURA SHALL NOT BE LIABLE FOR ANY VERBAL WARRANTY 

ASSURANCES MADE BY ANY EMPLOYEE OR AUTHORIZED 

DISTRIBUTOR, RESELLER OR INSTALLER THAT CONFLICTS 

WITH OR ENHANCES THE WRITTEN WARRANTY HEREIN. SOME 

STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF 

INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS 

ON HOW LONG AN IMPLIED LIMITED WARRANTY LASTS, SO THE 

EXCLUSIONS MAY NOT APPLY TO A PARTICULAR PURCHASER. 

NOTWITHSTANDING ANYTHING HEREIN TO THE CONTRARY, 

SÉURA’S  MAXIMUM  AGGREGATE  LIABILITY  RELATED  TO  ANY 

WARRANTY CLAIM OR WITH RESPECT TO A PRODUCT SHALL 

NOT EXCEED THE THEN CURRENT SÉURA WHOLESALE PRICE 

OF THE SPECIFIC PRODUCT FROM WHICH THE CLAIM DERIVES.
NOTICE OF ANY WARRANTY CLAIM MUST BE RECEIVED BY 

SÉURA, IN WRITING, PRIOR TO THE EXPIRATION OF THE 

APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. THE 

PRODUCT WARRANTY APPLIES ONLY FOR THE PERIODS SET 

FORTH ABOVE.

Warranty Procedure. 

A warranty claimant must contact Séura 

at  920-857-9069  for  a  diagnostic.  Please  have  your  Product 

receipt  available.  At  that  time,  Séura  will  provide  technical 

support  over  the  phone  to  attempt  to  fix  the  problem.  If 

unsuccessful,  a  Séura  Representative  will  determine  if  the 

Product will be serviced onsite, replaced, or returned to Séura’s 

factory in Green Bay, Wisconsin for repair. If Séura determines 

that the Product is not covered under the warranty or damaged 

in shipping, Séura will notify and inform the purchaser of service 

alternatives that are available on a fee basis.

Toll-Free Technical Support: 

Please  call  1-800-957-3872  to 

speak  with  a  Séura  Technical  Support  Representative.  Séura 

Representatives are available Monday-Friday, 8:00am-4:30pm 

Central Time.

Onsite Service:

 If Technical Support determines the problem 

may  be  fixed  onsite,  a  Séura  service  agent  will  be  scheduled 

within 24 hours to service the unit. A Séura representative will 

work with the customer to schedule a convenient time for onsite 

service.  Parts  may  be  sent to the  customer’s  location.  Onsite 

service is available in the United States during normal business 

hours Monday – Friday, unless other special circumstances exist 

and special arrangements are made.

Factory Service: 

If Technical Support determines the Product 

must be sent back to Séura’s factory for repair, the customer 

must  follow  return  instructions  below.  Séura  will  ship  the 

repaired Product to the authorized reseller, installer or 

customer’s  address. This warranty  does  not  cover  removal  or 

installation costs of Products.

Advanced Replacement: 

If Technical Support determines the 

Product  must  be  replaced,  Séura  will  ship  a  new  Product  to 

the  authorized  reseller,  installer  or  customer’s  address.  The 

customer must follow return instructions below to send the 

damaged Product back to Séura’s factory. Credit card information 

will be collected before shipment of the replacement Product. 

If Séura does not receive the original Product back within thirty 

(30) days of shipping the replacement Product, the credit card 

on file will be charged at full MSRP. This warranty does not cover 

removal or installation costs of Products.

Return Instructions: 

If  return  is  necessary,  Séura  will  issue  a 

return  goods  authorization  (RGA)  number  and,  if  applicable, 

specific  return  and  shipping  instructions.  A  Product  will  only 

be accepted for warranty claims if returned and shipped to 

Séura  in  the  Product’s  original  packaging  materials.  If  original 

packaging  is  not  available,  please  contact  Séura  to  receive 

authorized replacement packaging. Packages not bearing the 

issued returned goods authorization (RGA) number will not be 

accepted by Séura and will be returned to sender. In addition to 

the Product, the package must include the warranty claimant’s 

original sales receipt for the purchase of the Product. All Product 

returns shall be received by Séura, at 1230 Ontario Road; Green 

Bay, WI 54311 with freight prepaid by the warranty claimant. 

Séura shall not be responsible for, and the warranty claimant 

assumes and retains all such responsibility, any damage or loss 

to or of the Product during shipment to and from Séura as the 

result of a warranty claim.

Exclusive Remedy. 

This Limited Warranty sets forth the 

exclusive  remedies  of  a  warranty  claimant,  and  the  exclusive 

liabilities and obligations of Séura, with respect to allegations 

of a defective Product.

19163121.3

Summary of Contents for TW-5





















Reviews: