background image

16

Outdoor TV Mount Warranty

The standard limited warranty policies of Séura, Inc. (“Séura”) 

shall apply to all equipment or other goods (“Products”) at the 

time of sale to any authorized Séura distributor and/or product 

reseller.    These  warranty  policies  may  be  modified  by  Séura 

from time to time. Copies of the standard limited warranties 

then in effect for a particular Product will be made available 

upon  request  and  are  also  available  on  the  Séura  website  at 

https://www.seura.com/warranty/

This warranty is valid only 

with respect to Product sales in the U.S. and Canada.  
If any Product fails to work or operate properly because of a 

defect  in  materials  or  workmanship,  Séura  will,  if  notified  of 

such defect within the applicable warranty period indicated 

below, at its option, either: (a) repair the Product with new or 

refurbished parts onsite or at Séura’s factory, including Séura’s 

labor  if  applicable;  or  (b)  replace  the  Product  with  a  new  or 

refurbished  Product;  or  (c)  if  repair  or  replacement  is  not 

commercially feasible, refund an amount equal to a pro rata 

share of the current MSRP (as determined by the remainder 

of  the  warranty  period).  The  remedy  chosen  will  be  in  good 

faith and at the discretion of Séura.  In no event will Séura be 

responsible for any costs related to installation and/or removal 

of Product.

Séura warrants its Products as set forth below, which warranty 

periods shall start and run from the date of Séura’s sale of the 

Product:  

•  Indoor and Outdoor Mounts 

for  two  (2)  years  against 

defects in original hardware and/or workmanship. 

Excludes  corrosion  or  rust  resulting  from  damaged, 

scratched or chipped paint or other surfaces.

 Exceptions  to  Warranty: 

This warranty is valid only with respect 

to  Product  sales  in  the  U.S.  and  Canada.    Séura  does  not 

warrant Products against defects arising out of, related to, or 

caused by, whether totally or partially, and whether directly or 

indirectly, any of the following:

A. Failing to properly clean and maintain, any Product, part 

or component of a Product, including, but not limited to, 

filters, front bezel, and other Product areas or components;
B.  A  Product’s  extended  use,  including  particularly, 

commercial applications, where a Product is operating on 

average more than twelve (12) hours per day on a permanent 

or extended periodic basis;
C. Circumstances, damage (including concealed damage) or 

other conditions occurring during shipment of a Product or 

at any time after a Product leaves Séura’s facility (including 

without limitation transport of the Product to or from Séura 

before or after authorized service). Products must be packed 

properly  using  original  packaging  or  Séura  replacement  or 

pre-authorized packaging. Customer assumes all risk, and 

costs, including transportation costs, while Product is in 

transit to or from Séura;

D. Circumstances, damage or other conditions occurring 

during unpacking and/or removal of a Product from its 

original packaging, including the removal of protective 

material;

E. Improper, incorrect, or insufficient AC supply voltage to 

a Product;

F. Alterations, modifications, including use of unauthorized 

mount, or changes to a Product without Séura’s prior written 

authorization;
G. The incorporation of a Product into or within a product 

of a third party, without Séura’s prior written authorization;
H.  A  Product’s  misuse,  neglect  use,  abuse,  or  improper 

operation, including the failure to follow a Product’s normal 

and ordinary operating instructions;

I.  The  effects  of  fire,  flood,  lightning,  electrical  surges, 

water and other liquid infiltration, smoke, insect or animal 

infestation, sand, mud, chemicals, improper cleaning agents 

and other substances not intended to come into contact 

with a Product, including any such substances contact with 

a Product as the result of acts of God;
J. The improper or faulty installation, setup, or adjustment 

of a Product;

K.  A  Product’s  repair,  attempted  repair,  or  total  or  partial 

disassembly  by  any  party  other  than  a  Séura  authorized 

service representative;

L.  When  the  Product  occurs  with  pixel  errors  within  the 

specified and permitted area. (For more information about 

this,  inquire  directly  with  Séura  regarding  the  Séura  Pixel 

Policy.)

M. Corrosion that does not affect the performance of 

a Product or the reasonable cosmetic appearance of a 

Product (including without limitation, scratches or other 

paint  or  finish  damage  to  a  Product  that  lead  to  or  are 

caused by, in part or in total, corrosion); 

O. Normal wear and tear on the Product.

Séura does not warrant that its Products will integrate with any 

third party products at present or in the future. It is purchaser’s 

responsibility  to  test  and  verify  compatibility.  Further,  Séura 

does not warrant its software or programs, or any content 

downloaded after shipment. It is the purchaser responsibility to 

take precautions to protect the product from malware, viruses, 

data loss, and other potentially destructive programs.

Warranty  Disqualifiers. 

This  Limited  Warranty  only  extends 

to,  and  runs  for  the  benefit  of,  the  original  purchaser  of  the 

Product and only covers a Product purchased new.  All warranty 

claims must be submitted together with original proof of 

purchase and any Product subject to a warranty claim must 

retain  its  original  Séura  serial  number.  Séura  reserves  the 

right to require any warranty claimant to produce the original 

purchase receipt or other original purchase date proof as may 

Summary of Contents for TW-5





















Reviews: