3
1. Attach Wall Plate to Wall
NOTE: THIS PRODUCT SHOULD BE MOUNTED TO CONCRETE, STONE,
BRICK, OR WOOD STUDS.
1a. Measure the location for the template. The template will help guide
the distance from the edges of the TV to the center of the screen (b).
Make sure to tape the template securely to the wall (c). Use the wall
mounting template to mark four holes on the wall - two in the top plate
(d), two in the bottom plate. Ensure that the hole locations are level (e).
1b. Concrete, Stone, or Brick Wall Mounting:
Pre-drill holes through the
paper template with a 7/16” masonry bit (b). Insert a concrete anchor (c)
into each of these holes. Attach both wall plates to the wall using four
lag bolts (d) and four flat washers (e).
1c. Wood Stud Wall Mounting:
The wall plates (b) must be mounted to at
least two wood studs. Use a stud sensor to locate three adjacent studs.
Pre-drill a 3” deep hole using a 7/32” drill bit. Use the wall plate drawing
as a template to mark the location of the second hole in each stud.
Attach the wall plates to the wall using the four lag bolts (c) and four lag
bolt washers (d).
Instructions
2. Attach Mounts to TV
Remove the Vesa mount screws from the back of the TV. Make sure the
two TV mounts are mounted at the specified distance as indicated on
the template. Séura Outdoor TVs up to 65” require M6 bolts.
Note:
On the 86” TV only, replace the vesa mount screws with the
screws supplied in the hardware kit.
Note:
For use with Shade Series Outdoor TVs, use the included 1/8”
black plastic spacers between the back of the TV and the TV Mount
Bracket.
3. Hang TV and Adjust
NOTE: NEVER TRY TO HANG A TV BY YOURSELF. ALWAYS USE AT LEAST
TWO PEOPLE TO LIFT THE TV INTO PLACE.
Hook the top and bottom rails the TV rails over the top off the wall
plate. Both sets need to fully engage to be secure. Make sure the mount
is properly engaged.
Séura recommends checking knobs, screws, and bolts every 2-6
months. Temperature fluxuations, wind, and normal wear and tear can
loosen hardware over time.
If you have any questions regarding installation, please contact Séura
Support at 1-800-957-3872.
TV BACK VIEW
