2
Important Safety Instructions
Supplied Parts
CAUTION
DO NOT EXCEED
MAXIMUM LISTED
WEIGHT CAPACITY.
SERIOUS INJURY OR
PROPERTY DAMAGE
MAY OCCUR
This product is designed to mount televisions weighing up to 200 lbs to a vertical firm wall.
Safety Warning: Ensure that there are no missing or defective parts upon receipt. Never use
defective parts. Improper installation may cause damage or serious injury.
Note: The included hardware is for mounting on walls. If you are uncertain about the nature of
your wall, consult an expert. Please consult your hardware or installation professional for proper
mounting to other types of walls.
Overall Dimensions (W x H x D): 17.5” x 4.19” x 0.5” (Model: SW-1 for 49” to 65” )
Overall Dimensions (W x H x D): 26” x 4.19” x 0.5” (Model: SWL-1 for sizes over 65”)
Safety
WALL MOUNTING
TEMPLATE
INSTALLATION
MANUAL
TV MOUNTING
HARDWARE
SW-1:
4 Stainless Steel
Lag Bolts
5/16”, 3” long
4 Plastic Anchors for
Concrete, Brick, and
Stone, 2.5” long
4 Stainless Steel
Flat Washers
4 Black Plastic Spacers
1/8” Thick
(needed for use with
Shade Series TVs)
SWL-1:
6 Stainless Steel
Lag Bolts
5/16”, 3” long
6 Plastic Anchors for
Concrete, Brick, and
Stone, 2.5” long
4 Stainless Steel
Flat Washers
4 Stainless Steel Vesa
Flanged Screws
M8, 12 mm long
NOTE: RECESSED OUTLET REQUIRED
BECAUSE THE SLIM MOUNT ALLOWS THE TV TO SIT TIGHTLY AGAINST THE WALL, TRADITIONAL WALL
OUTLETS DO NOT ALLOW ENOUGH CLEARANCE FOR CABLES. UTILIZE EITHER RECESSED OUTLETS OR
REMOTE POWER LOCATIONS THAT ARE COMPLIANT WITH YOUR LOCAL BUILDING CODES.
[400mm]
15-3/4in
WALL MOUNTING TEMPLATE
CENTER OF TELEVISION
Attaching Wall Plates to Wall
Note: This product should be mounted to concrete, stone, brick, or wood studs.
Measure the location for the template. The template will help guide the distance
from the edges of the TV to the center of the screen. Make sure to tape the
template securely to the wall. Use the wall mounting template to mark four
holes on the wall - two in the top plate, two in the bottom plate. Ensure that
the hole locations are level.
Solid Surface Wall Mounting
(concrete, stone, or brick): Pre-drill holes through
the paper template with a 10mm masonry bit. Insert a concrete anchor into each
of these holes. Attach both wall plates to the wall using four lag bolts and four
lag bolt washers.
Drywall/Stud Wall Mounting:
The wall plates must be mounted to at least two
wood studs. Use a stud sensor to locate three adjacent studs. Pre-drill a 55mm
deep hole using a 4.5mm drill bit. Use the wall plate drawing as a template to
mark the location of the second hole in each stud. Attach the wall plates to the
wall using the four lag bolts and four lag bolt washers.
Instructions
Television Location from Edge to Center
17"
14-9/16"
13-1/16"
17"
14-9/16"
13-1/16"
29-5/16"
25"
22-5/16"
29-5/16"
25"
22-5/16"
49"
55"
65"
Bottom
of TV
Television Size
Right Side
of TV
Left Side
of TV
Top of TV
WALL MOUNT BRACKETS x 2
4 SLIM MOUNT IDENTICAL BRACKETS:
TV MOUNT BRACKETS x 2
USER MANUAL
W W W.SEUR A .COM
FOR SÉUR A OUTDOOR DISPL AYS
Slim Wall Mount
MODEL NUMBERS
SW-1
SWL-1
