22
6-1
Care and Maintenance
The Screen of the television is protected by a specially formulated anti-reflective glass. Use only mild, non-
ammoniated detergents and a soft cloth to clean. Harsh chemicals and abrasive agents can cause the coating
to scratch or flake, hindering television performance. Never scrape the glass with a razor blade.
The blue composite filter located at the bottom of the product may require occasional cleaning or replacement
in especially dusty or smoky environments. Ensure the filter does not become clogged. Use a vacuum cleaner
to remove mild dust and debris. For extremely dirty or dusty filters, remove from the television and rinse
with water and mild detergent if necessary. Allow to dry completely before replacing. For replacement filters,
contact Séura at 1-800-957-3872.
If debris or moisture becomes trapped between the glass and the television screen, the front may be removed
for maintenance.
1) Using 4mm hex key (Allen wrench), unscrew the bezel using the back access screws around the edge.
2) Remove the metal bezel, glass, and o-ring from the front of the television.
3) Carefully clean. Ensure that no moisture is left on the glass or screen before replacing the bezel and glass.
4) Carefully reposition the o-ring seal into its groove. Replace the bezel and glass on the TV making sure the
o-ring seal does not become pinched or dislodged. Insert all screws without tightening, then tighten all
screws completely. For questions or assistance, call Séura at 1-800-957-3872.
Screen Care
Filter Care
Front Access (qualified personnel only)
IMPORTANT
Install and tighten all screws to
prevent water leakage.
Contact Seura for replacement
screws if necessary. Screws must
be of the correct metric size and
length to prevent damage to TV
bezel.
Consider contacting
your installer/AV
integrator for annual
filter care and internal
cleaning of the glass
