10
11
WARNINGS
Do not handle or remove your television mirror from the packaging until it is ready to be
installed.
To avoid damage to the television mirror, only transport it in a vertical position.
It is highly recommended that at least three (3) persons assist in the installation of the
television mirror.
Mirror suction cups are not recommended for use in the installation of your television mirror.
Inspect the desired location for installation and be aware of all electrical wiring pathways,
water pipes, gas lines, or other potentially hazardous conditions that may exist to protect
from accidental damage during creation of on-site conditions.
Ensure all required electrical specifications are adhered to and have been installed by the
appropriate individuals and are code approved.
Ensure all framing requirements, if needed have been completed to building code and pose
no structural issues.
It is REQUIRED that this product is plugged into an electrical outlet protected by a Ground
Fault Circuit Interrupter (GFCI) to protect against electric shock, fire, and/or injury. Failure to
do so will void any warranty for this product.
Only qualified individuals should attempt to service the product. Removing covers can
expose you to high voltage and other dangerous conditions.
2-1
Recommended Location
2-2
Installation Instructions
3-1
Preparation
3-2
Connecting Power
3-3
Connecting TV antenna
3-4
Connecting VIDEO
3-5
Connecting HDMI
3-6
Connecting Component Video
3-7
Connecting PC
3-8
Connecting Speaker Output
3-9
RS-232 Control
3-10
Connecting IR Output
3-11
Connecting IR Input
2
Installation
3
Connection
2-2
Basic Installation Instructions
nOTE: all SÉURa drawing packages indicate generalized nominal residential wood framing construction, and are not indicative of any particular
building code. It is the installers responsibility that all electrical, audio/visual, and framing construction are code compliant to the municipality in which
the product is being installed. Modifications made to SÉURa’s recommendations are at the sole discretion of the installer and release SÉURa of all
liability.
1. Reference specifications included with your product for instructions designed for your
exact mirror size and configuration.
2. Verify that the wall is built to the provided specifications.
3. Install mounting brackets.
• Refer to Fastener Packet for detailed mounting instructions.
• Ensure mounting brackets are securely fastened using wood
framing members where possible.
4. Transport product in a vertical position to desired location to avoid product flex or damage.
5. Connect power supplies and audio/video components.
• It is strongly recommended to test all electrical and electronic devices to verify proper
integration and functionality before securely mounting it to the wall.
6. Position television mirror close to wall surface and securely engage mounting brackets.
• Allow for a 1/4” ventilation gap for proper air flow and heat transfer.
7. Check to ensure the television mirror is fully engaged and secure to the mounting brackets.
8. Reference the appropriate electronics manual for television mirror operating instructions.
2-1
Recommended
Location
The environment in which the television mirror
product is installed will affect the product’s
performance. The key factor to consider for
proper installation is surrounding and ambient
light. Use the following guidelines to maximize the
performance of the SÉURa product:
Type of Lighting:
avoid direct natural sunlight and
excessive fluorescent lighting on the television
display. These conditions will diminish the
television brightness, and hinder its performance.
Light Direction:
avoid directing lights toward the
mirror. Position lights such that they provide light
on the person or object to be reflected, not the
mirror itself. For example, lights on the wall next to
the mirror are preferred over lights located on the
ceiling in the center of the room.
Background Colors:
Sidewalls and furnishings
that are dark, uniform, and non-reflective will
provide for better performance of the television
quality. Bright colors, patterns, and contrasting
colors will minimize the quality of the display.
N
N
LCD
1/4" VENT
GAP
RETAINING
CLIP
MIRROR
SURFACE
INTERLOCKING
Z-BRACKETS
WALL
SURFACE
INTERFACE
PLATE
TYPICAL WALL SURFACE
SHOWING THE NEEDED
ROUGH OPENING
INTERLOCKING
BRACKETS
TYPICAL A/V AND
POWER LOCATION
SHEET
2
Screen Size Class:
32”, 40”, 46", & 52”
Panel Type X-Gen LCD Panel
10-bit LCD Panel Yes
Pixel Resolution Full 1920 x 1080 HD Resolution
Backlight System
Full Array LED
Viewing Angles 1
76º H / 176º V
LED Life (hours)1 100,000
Audio System 10W + 10W
120HzFrameRate Yes
Tuning System ATSC / QAM / NTSC
Spectral Contrast Engine Level MC (over 2,000,000:1)
Aspect Ratio 16:9
Response Time 4ms
Features:
AQUOS® Series Yes
AQUOS Net Yes (N/A on 32” LCD)
AQUOS Advantage SM S
upport Yes (N/A on 32” LCD
)
Digital Still Picture Display Yes
Game-Optimized Yes
Terminals Inputs:
HDMI™ 4 (v1.3 with deep color)
HD Component 2 (1080p compatible)
Composite Video RCA
x 2
S-Video 4-pin DIN x 1
Audio Inputs (L/R) 4 RCA
RS-232C 1
PC 1 (15-pin D-sub)
Ethernet Input 1 (N/A on
32” LCD)
Power:
Power Consumption
AC (watts) 32” = 130W
40” = 160W
46” = 200W
52” = 250W
32",40",46", 52", 65" PREMIER:
BACK LIGHT: 16
BRIGHTNESS: 0
CONTRAST: 33
COLOR: -9
TINT: 5
SHARPNESS:
-4
TOLERANCES
DIMENSIONS ARE IN
INCHES & [mm]
FRACTIONA
L 1/8[3mm]
ANGULAR:MACH
1.0 BEND
1.0 [.5 m]
TWO PLACE DE
CIMAL
.03[.8mm]
THREE PLACE DECIMAL
.015[.4mm]
PROPRIETARY AND
CONFIDENTIAL
THE INFORMATION C
ONTAINED IN
THIS DOCUMENT IS THE
SOLE
PROPERTY OF THE MANUFACTURER.
ANY REPRO
DUCTION IN PAR
T, OR
AS A WHOLE, W
ITHOUT THE WRITTEN
PERMISSION OF MANUFACTURER, IS
PROHIBITED.
16"
10"
74 1/4" MIRROR DIMENSION
50"
MIRROR DIMENSION
29 1/8"
29 1/8"
4 1/2"
35 1/2"
19" LCD
SCREEN
1" LIFT-OFF
CLEARANCE
NEEDED TO
MOUNT UNIT
1 7/16" TOTAL
UNIT DEPTH
3/4" IN
WALL DEPTH
11/16" OFF
WALL DISTANCE
3/16"
1"
POLISHED STAINLESS
MIRROR CLIPS
C-R-7450-19.2-EN-NI 74-1/4"
(W) x 50"(H) Custom Recessed TV Mirr
or with 19" LCD and Enhanced Glass
Beyond Audio Video
8045B.10.18.10
18OCTOBER2010
HIS "C"
Sales Order / Inv. Number
Item and Description
Date Created
Reseller
SHEET 1
SIGNATURE
AND DATE
REQUIRED
FRONT VIEW
SIDE VIEW
DATE:
SIGNATURE:
NOTE:
PLEASE SIGN AND DATE THIS PAGE BEFORE RE
TURNING TO SEURA. ONLY THIS PAGE NEEDS TO B
E
RETURNED. BY RETURNING THIS SHEET, YOU ARE AGREEING TO ALL DIMENSIONS SHOWN ON ALL DRAWING
SHEETS. FOR CUSTOM UNITS, WE
WILL NOT START THE BUILD PRO
CESS WITHOUT AN AUTHORIZED
SIGNATURE.
FOR DRAWINGS THAT REQUIRE
REVISIONS: SEND THE REVISIONS TO S
EURA ON THE ORIGINAL DRAWING
S.
DO NOT SIGN UNTIL ALL REQUIRED DIMENSIONS ARE VERIFIED AND ACCEPTED.
AFTER THE DRAWINGS ARE UPDATED, A REVISED DRAW
ING PACKAGE WILL BE RE-SENT FOR SIGNATURE.
TOLERANCES
DIMENSIONS ARE IN INCHES
FRACTIONAL 1/8 [3mm]
ANGULAR:MACH 1.0
BEND 1.0 [.5 m]
TWO PLACE DECIMAL
.03 [.8mm]
THREE PLACE DECIMAL
.015 [.4mm]
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN
THIS DOCUMENT IS THE SOLE
PROPERTY OF THE MANUFACTURER.
ANY REPRODUCTION IN PART, OR AS
A WHOLE, WITHOUT THE WRITTEN
PERMISSION OF MANUFACTURER,
IS
PROHIBITED.
www.seura.com
1.800.95.SEURA
PH. 920.857.9069
FAX 920.857.9490
Please read the relevant external equipment operation manual (DVD
player, etc.) carefully before making connections.
3-1
Preparation
3-2
Connecting Power
The TV automatically adjusts voltage.
Power cable is USa a-Type 3-conductor, shielded,
detachable.
aC Receptacles: 110~240v, x 1, 50/60, gFI circuit.
3-3
Connecting TV Antenna
Connect cable to TV Coaxial input connector with an
outdoor or wall outlet antenna output.
Turn on the TV after all connections.
Watching analog TV & Digital TV
• Analog TV signal has a channel number structure
of 1, 2, 3, 4, 5, etc., but Digital TV signal has a
channel number structure of 1-1, 2-1, 3-1, 4-1,
5-1, etc.
• If you press TV button on the remote control, its
input source changes from analog to Digital or
Digital to analog.
Antenna Outlet
Séura TV Mirror (back view)
Video Input
Video
Audio
RF Coaxial Antenna
Power Outlet
Séura TV Mirror
(back view)
L
R
Séura TV Mirror (back view)
High Definition
Video Input
HDMI
Séura TV Mirror (back view)
Component
Video Input
Séura TV Mirror (back view)
Audio
L
Y
Pb
Pr
R
External
Speakers
Séura TV Mirror (back view)
PC Input
Séura TV Mirror (back view)
15-Pin VGA
PC Audio
Output
(green)
PC Audio In
(blue)
PC Input
Séura TV Mirror (back view)
Antenna Outlet
Séura TV Mirror (back view)
Video Input
Video
Audio
RF Coaxial Antenna
Power Outlet
Séura TV Mirror
(back view)
L
R
Séura TV Mirror (back view)
High Definition
Video Input
HDMI
Séura TV Mirror (back view)
Component
Video Input
Séura TV Mirror (back view)
Audio
L
Y
Pb
Pr
R
External
Speakers
Séura TV Mirror (back view)
PC Input
Séura TV Mirror (back view)
15-Pin VGA
PC Audio
Output
(green)
PC Audio In
(blue)
PC Input
Séura TV Mirror (back view)
Before connecting power, please
check your power adapter for
compatibility with wall outlet.
Power cable should be firmly
connected to the power source.
WARninG
Whenever you connect an external audio or video
system to your TV, ensure that all elements are
switched off.
