setro miniK10m, Operating Manual

Page: 31 / 32

Warnings for mounting:
1
2
3
4
5
6
7
8
9
10
Pull the transparent “Remove to Start” tag coming out of battery
cap at the back of the lock and activate the lock.
Read the user manual and apply password change and opening/closing
operations several times before the mounting of the lock.
Before mounting of the lock, switch lock handle to closing position.
Make sure that there is no friction in the cabinet lids. If there is a friction
in the cabinet lids, make the hinge adjustments and make the cabinet lid
operable.
Do not forget to place Stop Cam depending on the condition of the
right or left lid of your cabinet.
Do not over-tighten nuts or screws. The
maximum torque on the cylinder screw is
2 Nm.
Ensure that there is no friction between
strike plate and the cam.
Finally check the mounting screws, tighten the loose screws.
When placing the existing locks into place, if the cylinder hole
is big, use the adapter and do not over tighten the cylinder nut.
(max. 2 Nm).
Check the cabinet lid hinge adjustment at least once a year.
Tighten loose screws.
31