Setra Systems SRCM, Operation

Page: 27 / 28

As soon as the thumb drive is connected the SRCM it will be recognized and
bring up a Drive Connected menu.
• Select Read to transfer the master SRCM configuration from the unit to the
thumb drive.
• Select START to initiate the copy operation.
Remove the thumb drive and cable and move to the first “slave” unit to be
configured. With power applied to that unit, connect the thumb drive and cable.
Select Write and START to write the master configuration to the new slave unit.
A Write Process Successful message will appear if the configuration has been
written to memory. Review the various Menu screens of the slave unit and
subsequent units to confirm the proper configuration is stored. In most cases the
only change that will be required to clone SRCM units is Primary and Second-
ary Room labels that match the location of installation.