3
To connect the Model 730 to your system use the appropriate hardware for the type of fitting:
• Use a Swagelock® Ultra Torr vacuum fitting to connect to the O.5” or 0.25” OD tube.
• Use an O-ring/centering ring and clamp to connect to the NW16 or 25 flange options.
NOTE:
A stepped O-ring carrier may be used to connect the NW16 flange to an NW10 flange
on the system.
• Use a Male 4 VCR™ or 8 VCR™ Face Seal Fitting and sealing gasket to connect to the female
swivel 4 VCR™ or 8 VCR™ Style Face Seal Fitting.
NOTE:
Tighten fittings in accordance with the manufacturer’s specifications.
Figure 1: Outline drawing of Model 730 with 9-pin D-sub and 0.5” and 0.25” OD
Tube.
0.12
[3.05]
1.50
[38.10]
Pin 1
Pin 9
2.06
[52]
0.99
[25]
2.06
[52]
0.75
[19]
0.50
[13]
0.25
[6]
Model 730 with 0.5” diameter tube
Model 730 with 0.25” diameter tube
in.
[mm]
