Setra Systems BL-4100S, User Manual

Page: 15 / 39

15
SETTING THE PRINT FUNCTION
The PRINT key can be setup to send readings to a printer or computer under
different parameters via the RS-232 port. The selectable print functions are:
stable print which will only print once a stable reading is attained, instant
print which will print immediately after the PRINT key is pressed (note: the
reading may not be stable) and interval print which may be programmed to
print at predetermined time intervals. The number of line feeds may also be
set for label printing. The print function is separate from the line feed setup,
i.e., set the print function first then re-enter the print menu to program the
number of line feeds.
To set the
PRINT
key function, use the following procedures:
STEP 1:
TARE
POWER
MODE
FUnC 0.00
Hold down the TARE key then press the MODE key. Release both keys, the
display will read “FUnC”.
STEP 2.
MODE
TARE
POWER
PrIn7 FUnC
Press the
TARE
key again and the display will read “PrInT” for the print menu.
Note: To escape anytime during this procedure, press the TARE key until
“ESCAPE” is displayed, then press the
MODE
key.
STEP 3.
S7AbLE PrIn7
MODE
TARE
POWER
Press the MODE key to enter the print menu. The display will read “STAbLE”
for stable print.