2. Installation:
Installation of this interface is very easy as it is completely plug and play. There is
no need to open the radio to insert any PCB etc.
Each Mercedes car model has a different process to open the dashboard
panel. (Please check the Car manufacturers manuals to know how to open
the dashboard and access the panels).
Once the back panel of the LCD is accessed it will have a 4Pin LVDS round
connector remove this and insert our cable here. The removed cable should
be inserted to our interface box. (Yellow Arrow)
The Power Harness will be removed from behind the CD and inserted to the
Power Harness provided with the interface. The Power harness plug
provided with the interface will be inserted in the place the original plug
was removed. The third plug will be connected to the CAN Box to provide
power to the interface.
*NOTE: Make sure that the power harness has been connected securely if not connected
properly there may be problems in power being sent to the interface .
4Pin LVDS CABLE
