2. Camera Functions:
The Reverse Camera is automatically triggered when engaging the reverse
gear of the car. The display is also equipped with moving reverse guidelines
which help guide the driver while reversing the car.
The Front Camera is automatically triggered after the person is in reverse
gear and engages Drive gear will automatically turn on to assist the driver
while parking. It will stay on for 10 Seconds and then the screen will
automatically turn back to the OEM display.
The User can also switch to the front camera using a push button switch.
This can be used in cases when the driver is parking the car without having
to engage the reverse gear for example in situations where the driver is
parking in a garage.
The User can also switch to the front camera by pressing and holding for 3
seconds the "C" button next to the controller knob.
The Guidelines are accurate as CAN code is used to generate them using
the steering wheel position as a reference.
This interface is suitable for both 7 Inch high resolution (800*480) screens
(DIP7 set UP and DIP8 set UP) and 6 Inch Smaller low resolution (480*240)
screens (DIP7 set UP and DIP8 set DOWN). The connection is the same for
both screens.
