5. DIP Settings:
DIP Down= ON DIP UP= OFF
DIP
ON
OFF
Default
1
No function
No function
UP(OFF)
2
Front camera installed
Front camera not installed DOWN(ON)
3
No function
*will be used in future version
No function
UP(OFF)
4
No function
No function
UP(OFF)
5
Reverse camera installed
Reverse camera not
installed
DOWN(ON)
6
Auto-Trigger with 10s timer
enabled for front camera
Auto-Trigger with 10s
timer disabled for front
camera
(*Only manual switch will be
used if function is off)
DOWN(ON)
7
No function
No function
UP(OFF)
8
6 inch screen selected
7 inch screen selected
DIP7&DIP8=UP(OFF)
6. Power Definition for 6Pin power connector between CANBOX and Interface:
YELLOW
：
12V power supply (Battery)
RED
:
ACC
（
=12V when key in ignition state
）：
when=12V
，
the interface works.
BLACK
：
Ground to Chassis
。
GREEN
：
Can box generated reverse trigger signal [when =12V the reverse video is enabled], this wire is automatically
generated by CAN bus.
WHITE:
This wire is the switch signal, when the user presses the touch panel for >1 second, this wire goes to 5V, then the
interface switches.
GRAY
：
CAN box’s communication data with guideline angle.
