SETBus Electronic Destination Sign, Operation And Instruction Manual, Page: 113 / 171

Instructions for use
To create the messages of electronic panels, will be made basically
three steps:
• 1
st
create / open a composition;
• 2
nd
select the panels and inform their sizes;
• 3
rd
edit the messages for each Destiny / Extra.
After these steps, the messages can be saved in the computer. These
messages may also be exported to a file (with extension STB), being
this file is used by the Control Unit to import the messages.
Compositions
The composition consists of a set of electronics billboards. Each panel
has a unique address and its settings of Destinations and Extras. You
can edit the Content of each Destination / Extra in the panel may be
set the number of steps, the time to exchange steps (if the effect
permitting), texts (may set the font), the spacing between characters
text, images, the positioning and alignment vertical and horizontal of
texts and images, and the division of columns.
It is possible to perform the simulation of Destination / Extra for each
panel or set of panels.
New
In Figure 9 is shown how to create a composition.
1- Select the New option to display the field Description.
2 -Description given for the composition.
3- Button (at the bottom) creates a new composition and advances to
the next step.
Home Screen
In the Home screen (Figure 8), is already shown the compositions screen.
For more details about the compositions, see "Compositions" item.
Figure 9 - New composition Figure 8 – Home Screen
1
2
3
125