LED Functions
Dip Switch - Selections
WARNING
For correct automatism functions and to guarantee the optimisation of the parameters that regulate wing movement,
adjust wing weight using dip switches S1 and S2 as indicated below.
Semi-automatic mode
Battery mode
Semi-automatic mode enabled.
In this mode wings close similar to
how they open, it doesn’t start
automatically but must be con-
trolled by the operator.
Semi-automatic mode disabled
(Default). In this mode the closing’s
wings starts automatically after a
time according to the idle time’s
setting.
In the event of power failure the
equipment continues working
powered by the battery. (Default).
In the event of power failure, the
equipment moves the doors to
the “Stop open” position, and
stays in this condition until power
returns or a new logic is selected
using the multi-logic selector.
20
Installation Instruction
LIGHT MILLENNIUM
N° Wings
Weight per
wing (kg)
2
30 ÷ 60
1
60 ÷ 120
N° Wings
Weight per
wing (kg)
2
0 ÷ 30
1
0 ÷ 60
N° Wings
Weight per
wing (kg)
2
60 ÷ 80
ON indicates mains
voltage present
ON
indicates
encoder
signal
presence
ON indicates electronic
lock power
ON indicates motor
power supply
ON indicates 12V external
peripheral power supply
Diagnostics Led
(see Error Message Table)
External peripheral
signal presence led.
Fig. 38
Factory use only
Summary of Contents for LIGHT MILLENIUM
Page 1: ...Automatisms for sliding doors I N S T A L L A T I O N I N S T R U C T I O N...
Page 2: ...2...
Page 23: ...23...
