SEALED ENERGY SYSTEMS
®
3
User Manual
1.
REVISION HISTORY
2.
INTRODUCTION
2.1
Scope
This specification describes the physical, functional and electrical
characteristics of a rechargeable Lithium Ion battery SE-2034 by
Sealed Energy Systems (SES®). This specification is the interface
document between SES® and its customers. It is understood that
the customer may create their own internal specification. However,
this specification is the master that defines the battery’s operation.
2.2
Battery Pack Overview
This specification describes the physical, functional and electrical
requirements for the SE20403NR29 Smart Battery including a
rechargeable Lithium Ion battery and a Battery Management Module.
The battery consists of twelve (12) Lithium Ion rechargeable cells of
INR-18650 size, assembled in a 3 series/ 4 parallel (3S4P) configuration.
Each cell has an average voltage of 3.6V and a typical capacity of
2.85Ah giving a battery pack of 10.8V and 11.4Ah typical.
The battery is capable of communicating with host or the charger
through the System Management Bus (SMBus). The battery is fully
SMBus and SBDS Revision 1.1compliant. Protection is provided for
over-charge, over-discharge and short circuit. For redundancy,
passive safety devices have been integrated into the pack to protect
against over- current and over-temperature, and secondary
overvoltage has been implemented with a logic-fuse and controller.
Revision
Release
Date
Revisions
Issued
Approved
1.0
20/01/2020 Released
SES
MGM
1.1
08/01/2020
Certificate of
compliance, EU REACH
Regulation no.
1907/2006 article 33(1)
contents of all SCHV
<0.1% w/w
INTERTEK MGM
1.2
08/01/2020
Certificate of
compliance, REACH
Ann-II of 2011/ 65/EU
and adm EU 2015/863
INTERTEK MGM
1.3
29/01/2020
BIS, Certificate of
Registration issue on
IS 16046-2:2018
INTERTEK MGM
1.4
-
Certificate of
Compliance issued on
UN38.3 and IEC/
EN 62281
NEMKO
P
1.5
-
Certificate of
Compliance issued on
IEC/EN 62133-2:2017
NEMKO
P
