49
SD Card
[Backup -> SD Card]
Saves the whole radio configuration onto
the SD Card - including all models and
radio settings. You can only save one
Backup at a time. The last Backup is over-
written.
[Read fromSD Card]
Loads a backup from the SD Card. Only
use after consulting Servonaut.
[Read template from SD Card]
on page 2
With this function you can load light set
presets provided by Servonaut. To save
memory space only load the presets you
need. You will find the available presets
when you set up a new model, see [Light
sets]
page 17.
Green button [Menu] > [1v2] > [SD Card]
on page 2
An SD card slot is in your radio casing (SD
card included).
The SD card has two functions:
Ÿ
You can
save the radio configuration
with all model settings.
Ÿ
You can load
software updates
from
the SD card to your radio as well.
[Model -> SD Card]
Saves one model to the SD CARD. After
pressing this softkey you get a list of all the
models. You can load these models to
another HS16 as well. The radio saves the
model in a file using the first eight letters of
the model name as the file name. If a
previous file with the same model name
exists, it is overwritten on the SD CARD.
[Read Model from SD Card]
Loads one model from the SD CARD. After
pressing this softkey you get a list of all the
models on the SD Card. Press the softkey
for the model you want to load. The radio
saves the model with a free model number
as long as there are less than 30 models
saved. If you already have 30 models
saved you can’t load another one from the
SD CARD.
21. SD Card
SD card slot in your radio
Caution: Always switch the radio off
before you insert/remove the SD Card.