18
Light Sets
Setting the channel assignment
The light set templates use preset servo
channels. If you want the light set to use
other servo channels you can change it with
[Menu] > [2v2] > [Swap channel]. This func-
tion is not available for light sets with multi-
switch function.
See chapter Menu Receiver
Change the softkey assignment
For the light set templates you can adjust
the softkey assignment with [Menu] > [2v2]
> [Swap control].
See chapter Menu Radio
Ÿ
Press [Change] and choose the receiver
channel connected to the mini multi-
switch or mini light set.
Ÿ
In the menu [Type] choose the control
type [Impuls] on the second page.
Ÿ
Set the [Length] to 0,5s. Don’t change
any other settings for the control and
servo channel. Assign a [Name] to each
softkey, e.g. Indicator L and Indicator R.
Ÿ
Warning Signal, Light:
Press [Menu] >
[Control] and press one key of the pair
you want to use for the warning signal
and light.
Ÿ
With [Reset] you can delete all settings
for this control. Switch the softkeys with
[Reverse] if necessary.
Ÿ
To assign a channel to the control go to
page [2v5] with the blue menu button.
Ÿ
Press [Change] and choose the receiver
channel connected to the mini multi-
switch or mini light set.
Ÿ
In the menu [Type] choose the control
type [Impuls] on the second page.
Ÿ
Set the [Length] to 2,0s. Don’t change
any other settings for the control and
servo channel. Assign [Names] to each
softkey, e.g. Warn and Light.
Ÿ
You can also name the channel in the
servo channel menu, e.g. ML4 for the
light set, for an even better overview.
Ÿ
Press [OK] a few times to get back to
the operating screen.