25
4
The DiCa can identify and decode
multiswitch, multiprop, nautic or
multibus signals according to Robbe™ /
Futaba™ or Graupner™ standards
automatically. The 8 subchannels a to h
are shown as small bars.
Monitoring the receiver signal
and power supply
In diagnose mode, the DiCa starts to
monitor the receiver signal and power
supply voltage. Press the black button
to see the results.
4
5
6
On the left side the highest and
lowest receiver voltage since en-
tering the diagnose mode is shown. A
voltage below 4.5 is critical. Strong dig-
ital servos or servos with heavy load
can overuse a receiver supply (in most
cases a BEC) and may lead to mal-
functioning.
On the right side the shortest and
longest control impulse length is
shown as percentages.
5
6
2