23
1
2
3
4
Connect the servo here and en-
sure correct polarity.
The percentages shown here are
equal to the values a servonaut
radio would show.
The lowest measured servo sup-
ply voltage is shown, a value be-
low 4.5V is critical. Strong digital servos
or servos with heavy load can overuse
the internal BEC. In this case use a re-
ceiver battery or an external BEC.
The length of the servo control
impulse is shown in microsec-
onds, the servo is centered at a value
of 1500us or 0%.
1
2
3
4
The servo mode to control a
ESC
The servo signal output can also be
used to test an electronic speed con-
troller. If the ESC has a BEC power
supply, the DiCa is powered by this
supply, too.
D
on’t forget to jack up your
model or disconnect the motors
for setup, testing and adjustments.