18
DiCa Display-Card
The Servonaut Display-Card has been
designed to be used:
•
as a configuration tool to custom-
ise certain Servonaut modules
(look for the Display-Card Logo)
•
as a lipo battery checker
•
as a tool to test your servos and
speed controller
•
to analyse the signals from your
receiver
•
to monitor the BEC voltage in your
model
What’s in the box
•
DiCa Display-Card Modul
•
A servo style cable
•
This manual
Operation
Use the rightmost black button to
switch between the four main functions
and to return to the main menu. The
two left white buttons are used to adjust
settings like battery type or servo posi-
tion.
Specification
•
2x20 character LCD
•
Configuration tool using plain eng-
lish words
•
Battery checker for 2s, 3s and 4s
Lipo, LiIo and LiFe
Servo test,
2A internal BEC
•
Receiver signal diagnose, auto
detection of multibus channels
•
Continuous monitoring of battery
and BEC voltages
•
Undervoltage alarm
Safety
Read the manual
•
Avoid short circuits
•
Do not expose DiCa to water or oil
•
Disconnect a battery immediately
after use
•
Don’t forget to jack up your model
or disconnect the motors for setup,
testing and adjustments