Servomech S.p.A.
16.30-40-50.E - Rev. 01 DD (M/Y) 05/19
5
2.3
Identification of the product
Every SERVOMECH linear actuator is provided with a nameplate, as shown below, which allows the product
identification and gives technical information about the product.
Figure 2.2 – Identification nameplate
1) Product code: is an alphanumeric code stating the type, size, ratio, version and stroke end switches of
the linear actuator;
2) Ratio: is the ratio of the input drive;
3) Stroke length: is the stroke length in millimetres achievable by the actuator;
4) Linear speed: is the linear speed expressed in mm/s when the actuator is provided with electric motor;
for an actuator without motor, this field is blank;
5) Delivery date: is the week/year of assembly (example: 30/13 = week 30 / year 2013) which usually
coincides with the delivery date; this date is considered as reference for the warranty period;
6) Serial number: is the identification number of the actuator which identifies the exact design of the
product even after a long time; the serial number is the essential reference for spare part orders.