Servomech CLA 30, Installation, Operation And Maintenance Manual, Page: 23 / 25

Servomech S.p.A. 16.30-40-50.E - Rev. 01 DD (M/Y) 05/19 23
8 LUBRICATION
SERVOMECH linear actuators CLA/CLB series are supplied lubricated, with lubricants indicated in the table
below.
ACTUATOR GEARBOX LINEAR DRIVE PUSH ROD GUIDE
CLA 30 Grease (NLGI 0 DIN 51818):
ENI Grease MU EP 0 Grasso (NLGI 2 DIN 51818):
ENI Grease SM 2
Also suitable:
SHELL Gadus S2 V220D 2 (NLGI 2)
MOBIL Mobilgrease XHP 222 Special (NLGI 2)
FUCHS Renolit FLM 2 (NLGI 2)
(*)
CLA 40
CLA 50
Same as linear
drive
CLB 30 Grease (NLGI 0 DIN 51818):
ENI Grease MU EP 0 Grease (NLGI 1 DIN 51818):
LUBCON Thermoplex ALN 1001
Also suitable:
FUCHS Renolit AX 2P (NLGI 2)
AGIP Grease AC 1 (NLGI 1)
MOBIL Mobilgrease FM 101 (NLGI 1)
KLUBER Klubersynth UH1 14-151 (NLGI 1)
(*)
CLB 40
CLB 50
Same as linear
drive
Table 8.1 – Lubricants
(*) – Push rod guide bush in self-lubricating material (no lubrication required).
DO NOT USE LUBRICANTS DIFFERENT FROM THOSE ABOVE MENTIONED.
DO NOT MIX INCOMPATIBLE GREASES.
IF DIFFERENT LUBRICANT SHOULD BE USED, PLEASE CONTACT SERVOMECH BEFORE PROCEED.
IN CASE OF CUSTOM PRODUCT EXECUTION, THE LUBRICANTS COULD BE DIFFERENT FROM THE
STANDARD ABOVE. TO KNOW THE TYPE OF LUBRICANT PLEASE REFER TO THE PRODUCT CHECK
SHEET SUPPLIED WITH THE PRODUCT.