Servomech S.p.A.
16.30-40-50.E - Rev. 01 DD (M/Y) 05/19
19
6.6
Electric motor installation
Connect the motor to the power unit of the plant or to the driver according to the following wiring diagrams:
Figure 6.1 – Electric wiring diagrams to power supply
(a) AC 3-phase motor; (b) AC 1-phase motor; (c) DC motor
Figure 6.2 – Electric wiring diagrams to motor terminal board
(a) AC 3-phase motor; (b) AC 1-phase motor; (c) DC motor
Check if the push rod shifting direction is compatible to the indications on the control unit, by powering the
electric motor on VERY BRIEFLY.
Figure 6.3 – Push rod shifting directions
a)
b)
c)