background image

I MPORTANT SAFETY I NSTRUCTI ONS

This machine is only suitable for commercial use, for example in hotels, schools, hospitals, factories, shops

and offices other than normal residential housekeeping purposes.

When using any electrical appliance, basic precautions should always be followed, including the following:

NOTE

:  Read all instructions before using this machine.

W ARNI NG!

To reduce the risk of fire, electric shock, or injury:

Do not leave the machine unattended when it is plugged in.  Unplug the unit from the outlet when not

in use and before servicing.

To avoid electric shock, do not expose to rain or snow.  Store, and use, indoors.

Do not allow to be used as a toy.  Close attention is necessary when used near children.

Use only as described in this manual.  Use only the manufacturer’s recommended attachments.

Never add water over 130º  F/ 54º  C to the solution tank.

Do not use with damaged cord or plug.  I f the machine is not working as it should, has been dropped,

damaged, left outdoors or dropped into water, return it to a service center.

Protect the cord. Do not:  use the cord as a handle, close a door on the cord, or pull the cord around

sharp edges or corners.  Do not run the machine over the cord.  Keep the cord away from heated

surfaces. To unplug, grasp the plug, not the cord.

Do not handle the plug, the cord or the machine with wet hands.

Extension cords must be 12/ 3 and no longer than 50 feet.  Replace the cord or unplug immediately if

the ground prong becomes damaged.

Do not put any object into openings.  Do not use with any opening blocked; keep free of dust, lint, hair,

and anything that may reduce air flow.

Keep loose clothing, hair, fingers, and all parts of body away from openings and moving parts.

Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes, or any

health endangering dusts.  Do not use to pick up flammable or combustible liquids such as gasoline or

use in areas where they may be present.

Turn off all controls before unplugging.

Use extra care when cleaning on stairs.

Connect to a properly grounded outlet only.

Liquid ejected at the spray nozzle could be dangerous as a result of its temperature, pressure, or

chemical content.

https://harrissupplyind.com - To Order Parts Call 608-268-8080

Summary of Contents for KC-1200













Reviews: