Page 11
Mouse Setup Screen
This Mouse Setup screen is used to set the mouse emulation
for each computer. Mouse emulation allows the mouse to
work despite the attached computers having different mouse
drivers.
The ServerLink has an automatic setting for mouse
emulation:
“AUTO”
enabled by default
If the automatic mouse emulation does not work for a
particular computer, manual mouse emulation may be set.
The manual emulation modes are:
“2 Button”
Two button mouse emulation,
“Wheel”
Two button Wheel mouse emulation,
“Wheel 4B”
Four button Wheel mouse emulation,
“None”
No mouse emulation.
For an operating system which does not use a mouse, set the
emulation to ‘None’.
MOUSE DRIVER REINITIALISATION.
If the mouse fails with a particular computer, it is sometimes
possible to recover by restarting the mouse driver on that
computer.
Restart the mouse driver by pressing the Function 9 key
<F9> while the mouse setup or diagnostics screen are visible.
If the mouse driver has restarted, the message “Mouse
sucessfully restarted” appears. The mouse should now work.
If the attempt to restart the mouse driver fails, the message
“Unsuccessful try again” appears. In this case, some other
strategy will be needed to get the mouse working.
