33
Settings on IP-KVM:
The control can be easily setup from the web page.
1. Click
on
Remote Control > Remote Wakeup
to bring up the configuration page.
2. Click
on
More entries
to add additional controlled target
3.
Key in the server description and the server’s IP address
4. Click
on
Get MAC
to get the corresponding MAC address of the server
5. Click
on
Apply
to save the entry
6. Click
on
Reset to defaults
if you want to clear all entries
Chapter 5 CAT 5 KVM Console Extender Module (Optional)
The CAT 5 KVM Extender Module is an optional CAT 5 Receiver Unit that allows you to extend a shared
second console (keyboard, mouse and monitor) up to 150m away.
5.1 CAT 5 Extension Console Unit Installation
1.
Plug one end of a CAT 5 cable into the RJ45 extension port of the CAT 5 KVM and the other end of CAT
5 cable into the RJ45 port on the CAT 5 Extension Console Unit.
2.
Connect a keyboard, mouse and monitor to the CAT 5 Extension Console Unit.
3.
Connect the power adapter and power on the CAT 5 Extension Console Unit.
5.2 Shared Console Operation
This shared console is designed so both the local console and the remote console can access and view the
server but only one at a time. The local console and the remote console will have the same priority to control
the computer. The change of the control as follow; after 2 seconds of no keyboard and mouse input, any
console can take over the control and switch the KVM or operate the server.
